Payment Details

Payment in full is due to Municibid no later than 5 working days after the close of the auction. Payment is accepted in the form of Electronic Fund Transfer, Wire Transfer, Credit Card and Certified Payment (Certified Check, Cashiers Check, or Money Order). Mailed payments must be postmarked no later the 2 working days from the date of the notice of award. Please note: It may take 2 to 3 days to process your payment once it is received. For full payment instructions please visit www.municibid.com/pay

Item Description

LOT of 11 Pallets of New Bus and Rail Car Parts and Supplies

You are bidding on a LOT of 11 pallets of various new bus and rail car parts and supplies. This lot is sold as a single unit and will not be separated. Quantities vary. It includes:

• 1 Pallet of Various Bus Windows
• 1 ZF Transmission: ASSEMBLY, ZF 4HP552C WITH TRANS OIL COOLER
• 1 Pallet of Bus Wheel Chair Ramps
• 1 Meritor Axel Housing
•  

  CONTACTOR: LCC & HCC HVAC SYSTEM FUNCTIONS (2200 SERIES CARS). LSBC, HSBC, & CFC HVAC SYSTEM  FUNCTIONS (2400 SERIES CARS).  F.I. : 9/4/01  SPEC. NO.: 9810

  RELAY: U/E POTENTIAL, FOR 17KG192, AND  17KG348 CONTROL GROUPS. REF. 2200, 2400,  2600 CONTROL GROUPS, REF. 286.  RAIL UNIT EXCHANGE ITEM  ORDER ON SHOP-SKOKIE  F.I. 4-30-99

  MODULE: WHEEL SLIP DETECTION SYSTEM. REF. GE PART LIST 41C662551, ITEM 7   PCK. INFO: PC 1 PC

  DUCT: FLEXIBLE COUPLING, FOR TRACTION MOTOR BLOWER ASSEMBLY INSTALLATION. REF: BOEING PART LIST 4-1-9 SONIC FINSH 7422387 RETAIN PER A/431 - 7/90    DRAW. NO: R-3-531   PCK. INFO: PC 1 PC

  CONTROLLER: TEMPERATURE, ELECTRONIC, REPLACES THE CM, CP, RH, & TH MERCURY THERMOSTATS INSIDE THE CAB-SIDE " DOG HOUSE" ON THE 2400 SERIES CARS. SPEC. NO.: 3232 F.I.4-22-03

  INTERLOCK: GROUNDING PARALLEL & SERIES CONTACTOR  FOR GE 17KG192M&R CONTROL GROUP ORDER ON SHOP - SKOKIE   PCK. INFO: PC 1 PC

  CAPACITOR: 68,000 UF, 63V, ELECT, RAD., (C41, C42.1-4) (SEE ITEM 9, FIGURE 8A, PAGE 52 IN TRANSTECHNIK 2400 INVERTER PARTS CATALOG.) USED IN THE 2400 SERIES INVERTER USED ONLY ON 2400 SERIES RAIL CARS. TO BE PURCHASED BY AREA 415 SKOKIE SHOPS ONLY. F.I. 01/19/04

  CAPACITOR: 1400 MFD, 200 VDC, ALUMINUM ELECTROLYTIC.    PCK. INFO: PC 1 PC

  CAM: KM12 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/13/06   SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4      DATE: 5/4/09

  INTERLOCK: GROUNDING PARALLEL & SERIES CONTACTOR  FOR GE 17KG192M&R CONTROL GROUP ORDER ON SHOP - SKOKIE   PCK. INFO: PC 1 PC

  CAM: KM28 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/14/06    SPEC. NO: 7166     DWG. NO: R-4-1523     REV. 4     DATE: 5/4/09

  CAPACITOR: 150 UF, 500V FOR 2400 SERIES TRANSTECHNIK INVERTER, 1 OF 6 ON CAPACITOR ASSY. A302. F.I.9-27-02

  CAM: KM19 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/13/06    SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4     DATE: 5/4/09

  RELAY: DC, PTR1, FOR 2400 SERIES CONTROL GROUPS, USED TO ARM THE VFR TIMING CIRCUIT. SPEC. NO: 7363       PCK. INFO: PC 1 PC

  CAM: LOADING, 17TH POSITION, FOR GE 17KM48AC1 CONTROLLER.  REFER TO GE PUBLICATION GEG-25499D, FIG. NO. 17, REF. NO. 395    SPEC. NO: 9578   PCK. INFO: PC 1 PC

  CABLE: ASSEMBLY R31/#84 USED EXTERNALLY ON 17KG347 CONTROL GROUP.  ORDER ON SHOP SKOKIE  REF. 2600 SEC. 4 GEG-25557D FIG. 4 ITEM 222  FI. 01/09/96

  CABLE: ASSEMBLY, 16 FEET LONG WITH CONNECTOR. USED ON 2400 SERIES DOOR SENSITIVE EDGE TO CONTROL PANEL.  CONTAINS (3100012), HEAT SHRINK (3130062), PLUG (4240051), CRIMP PIN (4240052).  CRIMP TOOL MOLEX (638190900).  ASSEMBLED BY SKOKIE ORG. 2414. F.I. 03/20/09    DWG. NO: R-1-1677     REV. NO: 1      DATE: 3/12/09

  CARD: CARD: U/E 1116, LATCHING RELAY UNIT EXCHANGE - DO NOT STOCK   PCK. INFO: PC 1 PC

  CAM: LOADING, WITH DIAL INDICATING PLATE, 25TH POSITION, FOR GE 17KM48AC1 CONTROLLER.  REFER TO GE PUBLICATION GEG-25499D, FIG. NO. 17, REF. NO. 403    SPEC. NO: 9578   PCK. INFO: PC 1 PC

  CONTACTOR: KIT. MODIFICATION FOR BCC.    REF: TRANSTECHNIK PARTS LIST

  RHEOSTAT: 500 OHM, 25 WATT, "R75".  FOR GE 17KG192M&R CONTROL GROUP.    SPEC. NO: 4576    PCK. INFO: PC 1 PC

  CONTACTOR: LCC & HCC HVAC SYSTEM FUNCTIONS (2200 SERIES CARS). LSBC, HSBC, & CFC HVAC SYSTEM  FUNCTIONS (2400 SERIES CARS).  F.I. : 9/4/01  SPEC. NO.: 9810

  CAM: KM16 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/13/06   SPEC. NO: 7166      DWG. NO: R-4-1523     REV. NO: 4       DATE: 5/4/09

  CAM: KM22 USED ON 2200 AND 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/13/06    SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4      DATE: 5/4/09

  RELAY: PILOT, THR, RHR, FOR CIRCUIT BREAKER AND CONTACTOR PANEL. REF: VAPOR PART BOOK FIG. 1-119 ORDER NEW    SPEC. NO: 7363   PCK. INFO: PC 1 PC

  CAM: KM7 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/12/06   SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4      DATE: 5/4/09

  BLOCK: CLEAT, TRAINLINE CABLE SUPPORT REF: BOEING PART LIST 2-1-5. CTA DWG. R-4-1085, REV. 1, DETAIL NO. 2      DRAW. NO: R-4-1085, DET. 2     REV. NO: 1              PCK. INFO: PC 1 PC

  CAM: KM23 USED ON 2200 AND 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/13/06    SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4      DATE: 5/4/09

  ELBOW: BRACKET ASSEMBLY FOR TRACTION MOTOR BLOWER ASSEMBLY REF: BOEING PART LIST 4-1-12 RETAIN - A/431 - 7/90   PCK. INFO: PC 1 PC

  GROMMET: WIRING 1-1/4" ID   PCK. INFO: PC 1 PC

  CAM: R1 USED ON 2400 SERIES  CAM CONTROL GROUP ASSEMBLIES.  PURCHASE FROM APPROVED LIST ONLY. DRAWING R-4-1520, LATEST REVISION, FOR REFERENCE ONLY.  F.I. 07/17/06     SPEC. NO: 7166

  CAM: KM2 USED ON 2200 AND 2400 CAM CONTROL GROUP ASSEMBLIES F.I. 07/12/06   SPEC. NO: 7166    DWG. NO: R-4-1523    REV. NO: 4       DATE: 5/4/09

  CONVERTER: DC TO DC (A07.1) +15V, -15V, 100W FOR 2400 SERIES TRANSTECHNIK INVERTER, WALL MOUNT ON DIGITAL CONTROL ASSEMBLY. F.I. 9-27-02

  CAM: KM1 USED ON 2200, AND 2400 CAM CONTROL GROUP ASSEMBLIES. F.I. 07/12/06   SPEC. NO: 7166    DRW. NO: R-4-1523    REV. NO: 4        DATE: 05/04/09

  BLOCK: CONTACT,FOR GE CLAM SHELL COUPLER.  2200 SERIES TRUCKS - HERITAGE FLEET.     DRAW. NO: R-2-1306    PCK. INFO: PC 1 PC

  CAM: KM6 USED ON 2200 AND 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/12/06   SPEC. NO: 7166    DWG. NO: R-4-1523    REV. NO: 4      DATE: 5/4/09

  SLIDE:  DISCONTINUE -  DOOR ASSEMBLY, RIGHT HAND, FOR VAPOR DOOR SLIDE ASSEMBLY. REF: VAPOR PART LIST FIGURE 6. NOTE: NOT INTERCHANGEABLE WITH SLIDE ASSEMBLIES FOR 2600 SERIES CARS.    SPEC. NO: 7363   PCK. INFO: PC 1 PC

  CAM: KM3 USED ON 2200 AND 2400 CAM CONTROL GROUP ASSEMBLIES F.I. 07/12/06   SPEC. NO: 7166    DWG. NO: R-4-1523    REV. NO: 4       DATE: 5/4/09

  CABLE:  DISCONTINUE -  #95, R5, #1/0 AWG, 69" LONG, TERMINAL SIZE 5/16" X 5/16", WITH A 3/4" CABLE GRIP. USED ON THE 2400 WORK MOTORS. ADD TO AREA 429 F.I. 01/16/04

  CAM: KM26 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/14/06    SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4       DATE: 5/4/09

  CAM: 31ST, FOR GE 17KM48AC1 CONTROLLER. MATERIAL IS TEXTOLITE.    SPEC. NO: 7166   PCK. INFO: PC 1 PC

  TIMER: UNIVERSAL MODEL 438U TIME CAPSULE, 1-1000 SEC., 24-240 VAC/DC 1A USED ON 2400 SERIES CARS ONLY   PCK. INFO: PC 1 PC

  COVER: TERMINAL BOARD ASSEMBLY WITH RECTRACTABLE CAPTIVE SCREWS.  USED ON 2400 SERIES CARS, SIDE DOOR CONTROL PANEL.  REF. SEC. 8, FIG. 8, ITEM 1 VAPOR DWG. 57521390, REV. A F.I. 11/18/04

  KIT: CONVERSION FOR USE WITH 10-24 NUTSERT WITH MANUAL TOOL 1748620.         UOP: KT      1KT

  RESISTOR: 100K TRIM POT, SIGN INVERTER 2200. REF. DRWG. 300-5684 ITEM 24. FI. 08/17/95

  CAM: KM24 & KM25 ON 2200 SERIES AND KM25 ON 2400 SERIES CAR. F.I. 07/14/06    SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4      DATE: 5/4/09

  CONTACT: MOVABLE, TYPE F1-127-H8  INTERLOCK ON 17JM7M417 LINE BREAKER.     SPEC. NO: 5914    PCK. INFO: PC 1 PC

  PANEL: U/E COMMUNICATIONS, MOTORMANS, REWIRED FOR THE MEISTER COMMUNICATIONS SYSTEM ON 2400 SERIES RAIL CARS. MUST HAVE SPEAKER VOLUME CONTROL AND HANDSET WITH LONG CORD. 2400 PARTS LIST FIG. 11-1-16 RAIL UNIT EXCHANGE ITEM F.I. 4-29-99

  BOARD: DEAD BATTERY START, DC/DC CONVERTER, (A05), SUPPLIER REFERENCE TT1441-4/10, USED ON 2400 SERIES CARS.  (SEE ITEM 31, FIGURE 1D, TRANSTECHNIK IPC, PAGE 20.) UNIT EXCHANGE F.I. 6-27-02 SPEC. NO: 7493

  U/E BOARD: CIRCUIT, REAL VALUE TRANSFORMER FOR USE ON 2400 TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02    SPEC. NO: 7493

  U/E BOARD: CIRCUIT, THRYRISTOR DRIVE FOR USE ON 2400 TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02 SPEC. NO: 7493

  U/E BOARD: CIRCUIT, VOLTAGE DIVIDER FOR 2400 TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02    SPEC. NO: 7493

  U/E BOARD: CIRCUIT, DISPLAY FOR USE ON 2400  TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02    SPEC. NO: 7493

  U/E BOARD: CIRCUIT, RC SNUBBER FOR USE ON 2400 TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02    SPEC. NO: 7493

  CAM: KM5 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/12/06    SPEC. NO: 7166    DRW. NO: R-4-1523    REV. NO: 4      DATE: 5/4/09

  THERMOSTAT: PROTECTIVE, OPENS @ 130 DEG. F, CLOSES @ 90 DEG. F, AIR COMFORT SYSTEM. REF: STONE SAFETY PARTS LIST SEC. 8, INDEX 2.    SPEC. NO: 1064      PCK. INFO: PC 1 PC

  U/E BOARD: CIRCUIT, 3-PHASE FILTER FOR USE ON 2400 TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02    SPEC. NO: 7493

  U/E BOARD: CIRCUIT, IGBT DRIVER, FOR USE ON 2400 TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02    SPEC. NO: 7493

  INTERLOCK: U/E NOTCH, WITH BASE, SUPPORTS, ROLLER, PINS & CONTACT FINGERS, FOR GE 17KM48L1, AND 17KM57A1 CONTROL GROUPS. REF: 2400 PARTS SEC. 4, GEG-25501 REF: 30. RAIL UNIT EXCHANGE ITEM F.I. 4-30-99    SPEC. NO:     REV. NO:              DATE:    DRAW. NO:     REV. NO:              DATE:    BULL. NO:     REV. NO:              DATE:     PAT. NO: PRV. ITEMID:   PCK. INFO:

  CAM: KM9 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/12/06   SPEC. NO: 7166    DWG. NO: R-4-1523    REV. NO: 4      DATE: 5/4/09

  HEATER: U/E CAB DEFROSTER ASSEMBLY REF: BOEING PARTS BOOK 9-3-20 UNIT EXCHANGE ITEM F.I. 04-25-00    SPEC. NO:     REV. NO:              DATE:    DRAW. NO:     REV. NO:              DATE:    BULL. NO:     REV. NO:              DATE:     PAT. NO: PRV. ITEMID: 4483034   PCK. INFO:

  ENCLOSURE: SASH, FOR ENCLOSURE INSTALLATION MOTORMANS SASH ASSEMBLY DISCONTINUE WHEN EXHAUSTED REF: BOEING PART LIST 2-8-11 RAIL UNIT EXCHANGE ITEM         UOP: PC      1PC

  HARNESS: ASSY., CABLE, SET, X100 (LV) (SEE TRANSTECHNIK 2400 INVERTER PARTS CATALOG, PG.(NA), TRANSTECHNIK DRAWING # UF-1185/06-220-01 F.I.5-8-03    SPEC. NO:     REV. NO:              DATE:    DRAW. NO:     REV. NO:              DATE:    BULL. NO:     REV. NO:              DATE:     PAT. NO: PRV. ITEMID:   PCK. INFO:

  CARD: CARD: U/E 1102, BRAKE LOCK-OUT AND POWER SUPPLY FOR GE 17KG348A1 CONTROL GROUP. UNIT EXCHANGE.   PCK. INFO: PC 1 PC

  U/E BOARD: CIRCUIT, RC WIRING FOR USE ON 2400 TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02    SPEC. NO: 7493

  CAM: KM8 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/12/06   SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4       DATE: 5/4/09

  U/E BOARD: CIRCUIT, RC WIRING FOR USE ON 2400 TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02    SPEC. NO: 7493

  CAM: KM14 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/13/06   SPEC. NO: 7166      DWG. NO: R-4-1523      REV. NO: 4      DATE: 5/4/09

  CAM: KM17 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/13/06    SPEC. NO: 7166      DWG. NO: R-4-1523      REV. NO: 4      DATE: 5/4/09

  CAM: KM18 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/13/06   SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4      DATE: 5/4/09

  CAM: KM20 USED ON 2200 AND 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/13/06   SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4      DATE: 5/4/09

  CAM: KM10 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/12/06   SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4       DATE: 5/4/09

  CAM: KM21 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/13/06    SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4        DATE: 5/4/09

  CAM: KM24 USED ON 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/14/06    SPEC. NO: 7166     DWG. NO: R-4-1523     REV. NO: 4    DATE: 5/4/09

  CAM: KM27 USED ON 2200 AND 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/14/06    SPEC. NO: 7166      DWG. NO: R-4-1523      REV. NO: 4      DATE: 5/4/09

  U/E BOARD: CIRCUIT, ACTUAL VALUE TRANSFORMER FOR USE ON 2400 TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02    SPEC. NO: 7493

  U/E BOARD: CIRCUIT, I/O ADAPTER FOR USE ON 2400 TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02    SPEC. NO: 7493

  CAM: LOADING, 18TH POSITION, FOR GE 17KM48AC1 CONTROLLER. REFER TO GE PUBLICATION GEG-25499D, FIG. NO. 17, REF. NO. 396.    SPEC. NO: 9578   PCK. INFO: PC 1 PC

  U/E VOLTAGE: DIVIDER WITH VARISTOR FOR USE 2400TRANSTECHNIK INVERTER. UNIT EXCHANGE F.I. 6-27-02    SPEC. NO: 7493

  CAM: KM11 USED ON 2200 AND 2400 SERIES CAM CONTROL GROUP ASSEMBLIES F.I. 07/13/06   SPEC. NO: 7166    DWG. NO: R-4-1523    REV. NO: 4        DATE: 5/4/09

  MODULE: LOGIC OR BLOCKING DIODE, BCRM, FRIM, SRM, FOR GE 17KG347A1 CONTROL GROUP   PCK. INFO: PC 1 PC

  U/E RELAY: PILOT, ILR, FLR, FOR LIGHTING CONTROL RELAY PANEL. REF: VAPOR PART BOOK FIG. 3-38 F.I. 11/09/00 ORDER NEW    SPEC. NO: 7363     REV. NO:              DATE:    DRAW. NO:     REV. NO:              DATE:    BULL. NO:     REV. NO:              DATE:     PAT. NO: PRV. ITEMID: 4213156   PCK. INFO: PC 1 PC

Condition: Please refer to pictures for the overall condition.

Important Information: Sold "As Is" "Where Is". Please note the Disclosure of Ownership Form below the pictures, which must be completed by the winning bidder.

Pickup Information: An appointment is required 24 hours in advance. You must provide a truck/trailer capable of accommodating all material at once and capable of being loaded from dock level. Contact Salvage Control Clerks at hvillatoro@transitchicago.com and msuthers@transitchicago.com for further assistance.

The purchaser must provide a vehicle capable of accepting the complete load at the time of pickup. The CTA will load the equipment with a forklift from ground level. Removal must occur between the hours of 7-11:30 am & 12:30 pm-2:30 pm Monday - Friday only.

Important Note: Shipment must be loaded as is - breaking down of shrink-wrapped pallets is not allowed.

Additional Information: Pickup appointments must be approved by CTA prior to arrangements being made on behalf of the bidder.

For Third-Party Pickup: Before the sold material can be released, the winning buyer will be required to send an email (from the winning buyer's email address used for the auction) identifying the representative authorized to pick up the paid item on their behalf. The authorized representative will need to bring the Notice of Award, Paid Receipt, bill of lading, and their picture identification.

Terms and Conditions: Read the Terms and Conditions of Sale before bidding. The Chicago Transit Authority reserves the right to reject any and all bids received and to withdraw any auction at any time without notification obligation whatsoever.

Attention: All auctions are subject to Chicago Transit Authority approval, even if the item is being sold "No Reserve".

Additional information on this Auction

Questions/Answers Ask the seller a question about this auction.

Item location This location is a general area based on the sellers zip code. It is not the specific address where the item is located.